Advanced Heat Exchanger Design and Simulation Whitepaper
Using nTop’s advanced geometry kernel it is now possible to produce the next generation of high-performance heat exchangers for the aerospace industry using advanced materials and manufacturing methods.
When coupled with ANSYS CFX, the evaluation of these high-performance designs can be achieved in ways that were not previously possible.
This report documents the design process of a Fuel Cooled Oil Cooler (FCOC) from initial design in CAD, process steps in nTop, and final Computational Fluid Dynamics (CFD) analysis steps in ANSYS CFX. This document should serve as a reference for nTop users to perform similar simulations on their own designs.
Download the Advanced Heat Exchanger Design and Simulation Whitepaper
What's included in the whitepaper?
This free whitepaper will help you develop a comprehensive understanding of the following:
- The design process of a Fuel Cooled Oil Cooler (FCOC) from initial design in CAD
- Process steps in nTop
- Final Computational Fluid Dynamics (CFD) analysis steps in ANSYS CFX
Is your software ready for additive manufacturing?
You can only reap the benefits of additive manufacturing for thermal management if you have the right engineering design tools.
Software built on transformative technology
Design technology that will not break.
Remove design limitations and overcome fundamental challenges with our unique modeling engine.
Your data goes in; optimized designs come out.
Feed your design workflows with real-world data, physics, and logic to harness the power of implicit modeling.
Design Process Automation
Build processes, not just parts.
Create reusable workflows and algorithmic processes that save you time and empower your team to scale.