Main menu

nTop

A journey through advanced manufacturing in 2021: Webinar series

Written by Sam Lindsay | Partner Marketing Director

Published on April 14, 2021

Watch our 6-part webinar series taking you through design, simulation, fabrication, testing, and quality assurance of a clean slate, rapid design of a traditional heat exchanger for Advanced Manufacturing. Watch the entire series on-demand now.

Advanced manufacturing has been gaining momentum and popularity in many industries across the world. Designing an optimal part for advanced manufacturing requires many checkpoints along the way to ensure the part won’t fail. These checkpoints include design, simulation, fabrication, testing, and quality assurance. Encompassing all of this into a workflow can seem daunting at first. This is exactly what nTop, ANSYS, Synopsys, EOS, and North Star Imaging (NSI) sought to do in order to demystify the entire process and show you how it can be done across teams and organizations. The entire process that this team is presenting took place in less than 4 months and included all of the critical checkpoints just mentioned.

Beginning Thursday, April 15 through Thursday, June 24 we will take you through a 6-part webinar series, A Journey Through Advanced Manufacturing in 2021. This series defines and describes each checkpoint in the design process. As an example part, we took on the challenge to develop a clean slate, rapid design of a traditional heat exchanger. Below you’ll find the title of each webinar and who should attend. Scroll down to the bottom to register for the entire series.

Webinar 1: Advanced manufacturing revolution -- leveraging a new paradigm for growth

  • Features: nTop, ANSYS, Synopsys
  • Date: April 15
  • Time: 12pm ET / 9am PT
  • Who should attend: Technology leaders and managers

Webinar 2: Design process with simulation

  • Features: nTop, ANSYS
  • Date: April 29
  • Time: 12pm ET / 9am PT
  • Who should attend: Designers, simulation analysts, and their managers

Webinar 3: Simulation to reality: Using additive manufacturing solutions to optimize and print

  • Features: ANSYS, EOS 
  • Date: May 13
  • Time: 12pm ET / 9am PT
  • Who should attend: Designers, AM engineers, and their managers

Webinar 4: CT scanning of the part and image-based inspection

  • Features: NSI, Synopsys 
  • Date: May 27
  • Time: 12pm ET / 9am PT
  • Who should attend: Machine operators, quality control engineers, and their managers

Webinar 5: Reverse engineering and validation

  • Features: Synopsys, ANSYS
  • Date: June 10
  • Time: 12pm ET / 9am PT
  • Who should attend: Analysts, quality control engineers, and their managers

Webinar 6: Live panel discussion

  • Features: nTop, ANSYS, EOS, NSI, Synopsys 
  • Date: June 24
  • Time: 12pm ET / 9am PT
  • Who should attend: Everyone interested in implementing Advanced Manufacturing within their organization

Watch the entire series on-demand here.

Sam Lindsay

Partner Marketing Director

Sam is the Partner Marketing Director for nTop. She brings eight years of experience in the simulation industry and spent nearly seven years at Dassault Systemes as a Partner Manager for the SIMULIA brand. While working full time for SIMULIA she worked on obtaining an MBA and soaking up as much knowledge as she could about the additive manufacturing space. With her education, experience and enthusiasm for AM she brings her writing and marketing passion to the nTop team. She lives in Providence, RI with her husband and spends quite a bit of time in NYC at nTop HQ.