Main menu


Energy Group enters into a reseller agreement with nTop to represent our software in Italy

Written by nTop

Published on June 1, 2021

In early 2021, nTop and Energy Group of Italy signed a reseller agreement. Energy Group, a large Stratasys reseller, is also now a reseller of nTop software. The partnership makes Energy Group a one-stop-shop for Stratasys and nTop customers in Italy.

Energy Group based near Bologna, Italy, was founded in 1995 and has been a Stratasys certified partner for 16 years. Energy Group is the largest Stratasys reseller in Italy. nTop is excited to announce that we are now partnering with Energy Group as a reseller of nTop and Stratasys joint solutions in Italy.

Engineering companies in Italy now have an end-to-end solution provider of both Stratasys FDM 3D printers and nTop software. This partnership provides a one-stop-shop solution that enables engineers to enhance their Stratasys 3D printing systems with the design automation modules of the FDM Fixture Generator. Furthermore, Energy Group will provide any technical support needed along the way, making it easier for nTop users to get up and running with nTop and quickly get access to technical support.

Stratasys and nTop

Late in 2020, we launched our first module of the FDM Fixture Generator, the Assembly Fixture Module, and then later the Masking Fixture Module. These modules enable you to automate the design of 3D printed jigs, fixtures, and masks with a few clicks no CAD required.

Energy Group and nTop

Jean-Michel Koch, nTop International Sales Director, says of this partnership, “I’m very excited to enter into this reseller partnership with Energy Group. By combining the power of nTop with Stratasys FDM 3D printers, this partnership enables us to offer a powerful end-to-end solution to the Italian market. Bringing Energy Group into our reseller ecosystem offers additional support to our international business and will be of massive value to existing and future users and customers utilizing Additive Manufacturing.”

Lucio Ferranti, president of Energy Group, says, “Additive Manufacturing allows the use of geometric shapes which were previously impossible to produce. nTop is the perfect software at the right time, and all of our customers can benefit from adopting this product. Energy Group is extremely proud of this partnership and collaboration with the fantastic nTop team.”


nTop (formerly nTopology) was founded in 2015 with the belief that engineers’ ability to innovate shouldn’t be limited by their design software. Built on proprietary technologies that upend the constraints of traditional CAD software while integrating seamlessly into existing processes, nTop allows designers in every industry to create complex geometries, optimize instantaneously, and automate workflows to develop breakthrough 3D-printed parts in record time.